Enable FTPS (990 port) on core FTP server

[akshayp]

Hello Guys,

We have installed Core FTP server ver. 2.0, build 649 , 64bit on Windows server 2016 platform. We tried to enable FTPS (990 port) on core FTP server but unfortunately it is not working, To enable the same we followed below steps

1) Edited Domain settings
2) Under 'Disable FTP' we have checked mark option ' FTPS / SSL Direct"
3) And pressed OK - OK - OK
4) And stop /started the core FTP services

but still core FTP server is not listening on FTPS (990 port). Not even getting telnet.


Please help to configure the same.

Regards
Akshay Purabia

[ForumAdmin]

set the "port" field to 990

[akshayp]

Well that will not serve FTPS protocol. setting a port 990 is like using port 990 instead of port 21 there will be no encryption. Looking for actual way to run core FTP server on FTPS(port 990) protocol

[akshayp]

Even though base on your recommendation, I've made changes and verified the same. It has been found working FTPS, But is it possible to have all 3 protocols (FTP-21, FTPS-990 and SFTP-22) running on same time.

[onpaysolutionsadmin]

I would also like to know if it is possible to run the 3 protocols; FTP(21), FTPs(990) and SFTP(22) at the same time for CoreFTP server?