no directory listing in passive mode (602 Lansuite/proxy)

thsman · Post by **thsman** » Wed Sep 01, 2004 9:56 pm

Here is the log of what happens

Welcome to Core FTP, release ver 1.3b, build 1375 (U) -- © 2003-04
WinSock 2.0
Mem -- 916,976 KB, Virt -- 2,097,024 KB
Started on Wednesday September 01, 2004 at 22:51:PM
Resolving thehairshow.co.uk...
Connect socket #452 to 66.98.164.61, port 21...
220 Microsoft FTP Service
USER thehairshow.co.uk
331 Password required for thehairshow.co.uk.
PASS **********
230 User thehairshow.co.uk logged in.
SYST
215 Windows_NT
Keep alive off...
PWD
257 "/thehairshow.co.uk" is current directory.
CWD /thehairshow.co.uk/
250 CWD command successful.
PASV
227 Entering Passive Mode (66,98,164,61,4,183).
LIST
Connect socket #496 to 66.98.164.61, port 1207...
timeout
425 Can't open data connection.
QUIT
221

XP Pro client machine sharing internet connection from another machine using 602 Lansuite. Zone Alarm on client machine with no ports blocked AFAIK. XP firewall is off on both client and host machine.

thsman · Post by **thsman** » Thu Sep 02, 2004 1:14 pm

When using proxy I can't connect to the ftp site at all. Without it, but with NAT, I get the results above.

The instructions you pointed to for WS_FTP call for firewall settings which I can't find in CoreFTP. I don't see how I can do this.

thsman · Post by **thsman** » Thu Sep 02, 2004 5:27 pm

Sorry I misunderstood. That is what I have tried already.

I presume by "internal ip" you mean NAT? All internet use programs are currently accessing via 602 proxies. It is possible this is a Windows problem as the machine that connects directly is setup for Microsoft Internet Connection Sharing. Then we have 602 with NAT (does that make two implementations of NAT?). Anyway all other programs on all clients work fine with proxy. The 602 NAT implementation makes no difference if it is on or off except for CoreFTP, which gets further if setup not to use proxy but with NAT turned on.

thsman · Post by **thsman** » Thu Sep 02, 2004 6:27 pm

I've already tried it both ways. It makes no difference.

thsman · Post by **thsman** » Thu Sep 02, 2004 7:28 pm

I have IE proxy settings that way. This is what I got from IE pointing to my ftp hostname;

220 Proxy602 Gateway ready, enter user@host[:port]
500 Host not found

It doesn't get past the proxy. I don't know where I could enter login details.

With Windows FTP I just get "Unknown host" but it does not provide a commentary on where it failed.

I know this isn't a problem caused in any way by CoreFTP so thanks for your help.

thsman · Post by **thsman** » Thu Sep 02, 2004 8:16 pm

I don't get what you mean. It looks like that is how to set up CoreFTP? If so that is what I have been doing.

thsman · Post by **thsman** » Thu Sep 02, 2004 8:58 pm

Using FTP proxy "transparent" I get this;

Resolving thehairshow.co.uk, via proxy ...
Connect socket #612 to 192.168.0.1, port 21 (to 21)...

USER thehairshow.co.uk
220 Proxy602 Gateway ready, enter user@host[:port]

There are no further messages after a couple of minutes waiting.

With Socks 4a or 5 I get this;

esolving thehairshow.co.uk, via proxy ...
Connect socket #656 to 192.168.0.1, port 1080 (to 21)...
Can't establish connection --> thehairshow.co.uk:21 @ Thu Sep 02 21:59:50 2004 (122-38)

thsman · Post by **thsman** » Fri Sep 03, 2004 1:50 am

I know it is odd but thehairshow.co.uk is the host as well as the username. These were working fine before the network was reconfigured and the ADSL modem was moved from my machine to another one. I'm sure I'm using the correct host, username and password.